[Testbot] UNKNOWN : Plone-trunk Zope-2.11 Python-2.4.4

CMFPlone Tests plone-tests at epy.co.at
Fri May 23 03:41:53 UTC 2008


CMFPlone Tests : UNKNOWN
Plone-trunk Zope-2.11 Python-2.4.4

Running /usr/local/python2.4/bin/python /home/stefan/autotest/temp/python24-zope211/test.py -q -1 --config-file etc/zope.conf --package Products.CMFPlone
Parsing /home/stefan/autotest/temp/python24-zope211-cmf22-plone40/etc/zope.conf
Test-module import failures:

Module: Products.CMFPlone.exportimport.tests.testControlPanel

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/exportimport/tests/testControlPanel.py", line 9, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.exportimport.tests.testFactoryTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/exportimport/tests/testFactoryTool.py", line 9, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.exportimport.tests.testPropertiesTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/exportimport/tests/testPropertiesTool.py", line 9, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testActionIconsTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testActionIconsTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testActionsTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testActionsTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testBrowserDefault

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testBrowserDefault.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testBrowserDefaultScripts

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testBrowserDefaultScripts.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testCSSandJSRegistry

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testCSSandJSRegistry.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testCatalogTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testCatalogTool.py", line 8, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testCheckId

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testCheckId.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testContentPublishing

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testContentPublishing.py", line 6, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testContentSecurity

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testContentSecurity.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testContentTypeScripts

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testContentTypeScripts.py", line 6, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testContentTypes

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testContentTypes.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testControlPanel

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testControlPanel.py", line 7, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testControlPanelScripts

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testControlPanelScripts.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testCookieAuth

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testCookieAuth.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testCutPasteSecurity

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testCutPasteSecurity.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testDateComponentsSupport

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testDateComponentsSupport.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testDateIndexRanges

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testDateIndexRanges.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testDisplayContentsTab

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testDisplayContentsTab.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testExternalEditorEnabled

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testExternalEditorEnabled.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testFolderButtons

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testFolderButtons.py", line 10, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testGetObjectSize

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testGetObjectSize.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testGroupDataTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testGroupDataTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testGroupUserFolder

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testGroupUserFolder.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testGroupsTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testGroupsTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testInterfaceTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testInterfaceTool.py", line 6, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testInterfaces

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testInterfaces.py", line 32, in ?
    from Products.CMFPlone.MembershipTool import MembershipTool
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/MembershipTool.py", line 16, in ?
    from Products.PlonePAS.events import UserLoggedInEvent
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PlonePAS/__init__.py", line 59, in ?
    from tools.membership import MembershipTool
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PlonePAS/tools/membership.py", line 28, in ?
    from Products.CMFPlone.MembershipTool import MembershipTool as BaseMembershipTool
ImportError: cannot import name MembershipTool


Module: Products.CMFPlone.tests.testLoggedIn

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testLoggedIn.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testMemberDataTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testMemberDataTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testMembershipTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testMembershipTool.py", line 10, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testMigrationTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testMigrationTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testMigrations

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testMigrations.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testNavTree

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testNavTree.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testNavigationParent

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testNavigationParent.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testNavigationView

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testNavigationView.py", line 8, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testNextPrevious

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testNextPrevious.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testOrderSupport

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testOrderSupport.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testPloneTestCase

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testPloneTestCase.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testPloneTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testPloneTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testPloneView

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testPloneView.py", line 10, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testPortalCreation

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testPortalCreation.py", line 6, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testPortalFactory

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testPortalFactory.py", line 6, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testQueryCatalog

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testQueryCatalog.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testQuickInstallerTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testQuickInstallerTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testRegistrationTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testRegistrationTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testRelatedItems

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testRelatedItems.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testRenderBase

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testRenderBase.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testRestrictedAcquisition

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testRestrictedAcquisition.py", line 11, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testS5

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testS5.py", line 2, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testSecurityDeclarations

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testSecurityDeclarations.py", line 7, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testSkeleton

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testSkeleton.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testSortObjects

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testSortObjects.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testSyndicationTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testSyndicationTool.py", line 6, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testTranslationServiceTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testTranslationServiceTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testURLTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testURLTool.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testUnicodeSplitter

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testUnicodeSplitter.py", line 5, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testUserFolderBasics

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testUserFolderBasics.py", line 7, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testUtilities

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testUtilities.py", line 2, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testWebDAV

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testWebDAV.py", line 2, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.testWorkflowTool

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/testWorkflowTool.py", line 8, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.test_doctests

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/test_doctests.py", line 9, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.test_functional

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/test_functional.py", line 15, in ?
    from Products.CMFPlone.tests import PloneTestCase, GLOBALS
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Module: Products.CMFPlone.tests.test_mails

Traceback (most recent call last):
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/test_mails.py", line 9, in ?
    from Products.CMFPlone.tests import PloneTestCase
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/tests/PloneTestCase.py", line 7, in ?
    from Products.PloneTestCase.ptc import *
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/ptc.py", line 22, in ?
    from Products.PloneTestCase import setup
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/PloneTestCase/setup.py", line 32, in ?
    from Products.CMFPlone.migrations import v2_5
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/migrations/v2_5/__init__.py", line 2, in ?
    from Products.CMFPlone.UnicodeSplitter import Splitter, CaseNormalizer
  File "/home/stefan/autotest/temp/python24-zope211-cmf22-plone40/lib/python/Products/CMFPlone/UnicodeSplitter.py", line 39, in ?
    class Splitter:
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/advice.py", line 132, in advise
    return callback(newClass)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 484, in _implements_advice
    classImplements(cls, *interfaces)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 461, in classImplements
    spec.declared += tuple(_normalizeargs(interfaces))
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1370, in _normalizeargs
    _normalizeargs(v, output)
  File "/home/stefan/autotest/temp/python24-zope211/lib/python/zope/interface/declarations.py", line 1369, in _normalizeargs
    for v in sequence:
TypeError: Error when calling the metaclass bases
    iteration over non-sequence


Total: 0 tests, 0 failures, 0 errors in 0.000 seconds.

Test-modules with import problems:
  Products.CMFPlone.exportimport.tests.testControlPanel
  Products.CMFPlone.exportimport.tests.testFactoryTool
  Products.CMFPlone.exportimport.tests.testPropertiesTool
  Products.CMFPlone.tests.testActionIconsTool
  Products.CMFPlone.tests.testActionsTool
  Products.CMFPlone.tests.testBrowserDefault
  Products.CMFPlone.tests.testBrowserDefaultScripts
  Products.CMFPlone.tests.testCSSandJSRegistry
  Products.CMFPlone.tests.testCatalogTool
  Products.CMFPlone.tests.testCheckId
  Products.CMFPlone.tests.testContentPublishing
  Products.CMFPlone.tests.testContentSecurity
  Products.CMFPlone.tests.testContentTypeScripts
  Products.CMFPlone.tests.testContentTypes
  Products.CMFPlone.tests.testControlPanel
  Products.CMFPlone.tests.testControlPanelScripts
  Products.CMFPlone.tests.testCookieAuth
  Products.CMFPlone.tests.testCutPasteSecurity
  Products.CMFPlone.tests.testDateComponentsSupport
  Products.CMFPlone.tests.testDateIndexRanges
  Products.CMFPlone.tests.testDisplayContentsTab
  Products.CMFPlone.tests.testExternalEditorEnabled
  Products.CMFPlone.tests.testFolderButtons
  Products.CMFPlone.tests.testGetObjectSize
  Products.CMFPlone.tests.testGroupDataTool
  Products.CMFPlone.tests.testGroupUserFolder
  Products.CMFPlone.tests.testGroupsTool
  Products.CMFPlone.tests.testInterfaceTool
  Products.CMFPlone.tests.testInterfaces
  Products.CMFPlone.tests.testLoggedIn
  Products.CMFPlone.tests.testMemberDataTool
  Products.CMFPlone.tests.testMembershipTool
  Products.CMFPlone.tests.testMigrationTool
  Products.CMFPlone.tests.testMigrations
  Products.CMFPlone.tests.testNavTree
  Products.CMFPlone.tests.testNavigationParent
  Products.CMFPlone.tests.testNavigationView
  Products.CMFPlone.tests.testNextPrevious
  Products.CMFPlone.tests.testOrderSupport
  Products.CMFPlone.tests.testPloneTestCase
  Products.CMFPlone.tests.testPloneTool
  Products.CMFPlone.tests.testPloneView
  Products.CMFPlone.tests.testPortalCreation
  Products.CMFPlone.tests.testPortalFactory
  Products.CMFPlone.tests.testQueryCatalog
  Products.CMFPlone.tests.testQuickInstallerTool
  Products.CMFPlone.tests.testRegistrationTool
  Products.CMFPlone.tests.testRelatedItems
  Products.CMFPlone.tests.testRenderBase
  Products.CMFPlone.tests.testRestrictedAcquisition
  Products.CMFPlone.tests.testS5
  Products.CMFPlone.tests.testSecurityDeclarations
  Products.CMFPlone.tests.testSkeleton
  Products.CMFPlone.tests.testSortObjects
  Products.CMFPlone.tests.testSyndicationTool
  Products.CMFPlone.tests.testTranslationServiceTool
  Products.CMFPlone.tests.testURLTool
  Products.CMFPlone.tests.testUnicodeSplitter
  Products.CMFPlone.tests.testUserFolderBasics
  Products.CMFPlone.tests.testUtilities
  Products.CMFPlone.tests.testWebDAV
  Products.CMFPlone.tests.testWorkflowTool
  Products.CMFPlone.tests.test_doctests
  Products.CMFPlone.tests.test_functional
  Products.CMFPlone.tests.test_mails

UNKNOWN




More information about the Testbot mailing list