[Setup] FW: Error: Couldn't install: zope.interface 3.6.3

Tue Jun 5 18:15:15 UTC 2012

Thanks
I've already set up a plone test site with  the unified installer. I used the system python2.7.2 and it worked fine. 
As for sudo apt-get install libxml2 libxml2-dev libxslt1-dev python-devI noticed that it  put some  libs in the system pyhton2.7.2 path so ...?But that got me further. I now have the instance in bin but I get an error when I try and start the server. daemon manager not runningzopectl>
This same minimal buildout worked before using the system python.
note:From all I've seen local distributions of Python are the way to go so I'm committed to working in this manner. Also, I need to set up Aspeli's environment with his buildout or else I can't continue using his  book that I bought. 
I know it's not recommended but I'm going to try over with a local 2.7 dist and see what happens. I'll  also try the IRC and see if someone else has encountered these  problems. 
Thanks again.

> Date: Tue, 5 Jun 2012 11:57:22 -0500
> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3
> From: vangheem at gmail.com
> To: a_rothenberg at hotmail.com
> CC: plone-setup at lists.plone.org
> 
> Just a note, the easiest way to get setup quickly is to use the
> unified installer http://plone.org/products/plone/releases/4.1.5
> 
> What you're now running up against is not having the required lxml libraries.
> 
> for ubuntu what I *think* you'll need is something like this:
> 
> sudo apt-get install libxml2 libxml2-dev libxslt1-dev python-dev
> 
> In your eggs section you might also want to include "Pillow"
> 
> 
> -Nathan
> 
> On Tue, Jun 5, 2012 at 11:50 AM, Aaron Rothenberg
> <a_rothenberg at hotmail.com> wrote:
> >
> > So I tried  ./bin/buildout -vv as per the suggestions.
> >
> > I re installed Ubuntu 11.10 with all the appropriate additions for Plone and
> > python. Also, I am using a different  minimal buildout (below) which had
> > previously worked with the Ubuntu system python(2.7.2) . It doesn't work
> > anymore with the local 2.6* python.
> >
> > This is the end of the output
> >
> > Getting required 'lxml>=2.2.4'
> >   required by plone.app.theming 1.0.
> > We have no distributions for lxml that satisfies 'lxml>=2.2.4'.
> > Getting distribution for 'lxml>=2.2.4'.
> > Running easy_install:
> > /home/aaron/.pythonbrew/venvs/Python-2.6/plone-python/bin/python "-c" "from
> > setuptools.command.easy_install import main;main()" "-mUNxd"
> > "/home/aaron/Plone4Book/MinimalBuildout/eggs/tmp2F9qTX"
> > "/tmp/tmpBO4LaDget_dist/lxml-2.3.4.tgz"
> > path=/home/aaron/Plone4Book/MinimalBuildout/eggs/setuptools-0.6c12dev_r88846-py2.6.egg
> >
> > Processing lxml-2.3.4.tgz
> > Running lxml-2.3.4/setup.py -q bdist_egg --dist-dir
> > /tmp/easy_install-JnFTNn/lxml-2.3.4/egg-dist-tmp-biCF11
> > Building lxml version 2.3.4.
> > Building without Cython.
> > ERROR: /bin/sh: xslt-config: not found
> >
> > ** make sure the development packages of libxml2 and libxslt are installed
> > **
> >
> > Using build configuration of libxslt
> > In file included from src/lxml/lxml.etree.c:239:0:
> > src/lxml/etree_defs.h:9:31: fatal error: libxml/xmlversion.h: No such file
> > or directory
> > compilation terminated.
> > error: Setup script exited with error: command 'gcc' failed with exit status
> > 1
> > An error occurred when trying to install lxml 2.3.4. Look above this message
> > for any errors that were output by easy_install.
> > While:
> >   Installing instance.
> >   Getting distribution for 'lxml>=2.2.4'.
> > Error: Couldn't install: lxml 2.3.4
> >
> >
> >
> > here's what I did from the start
> > pythonbrew install 2.6
> > then
> > pythonbrew switch 2.6
> > then
> > cd MyPloneProject (where I have bootstrap.p and buildout.cfg)
> > then
> > python bootstrap.py  --distribute
> > then
> > bin/buildout  -vv
> >
> > I also  tried python 2.6.6,2.6.7 to run the bootstrap.
> >
> > I get this early on
> > We have no distributions for ZODB3 that satisfies 'ZODB3>=3.9'.
> >
> > also I get a lot of these
> > Note also that the installation directory must be on sys.path at runtime for
> > this to work.  (e.g. by being the application's script directory, by being
> > on
> > PYTHONPATH, or by being added to sys.path by your code.)
> >
> > Here is the buildout:
> > [buildout]
> > extends =
> > http://dist.plone.org/release/4.1/versions.cfg
> > parts = instance
> > [instance]
> > recipe = plone.recipe.zope2instance
> > user = admin:admin
> > eggs = Plone
> >
> >
> > Thanks for the help.
> >
> >> Date: Sun, 3 Jun 2012 16:37:58 -0500
> >
> >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3
> >> From: vangheem at gmail.com
> >> To: a_rothenberg at hotmail.com
> >> CC: plone-setup at lists.plone.org
> >>
> >> What buildout are you running?
> >>
> >> Can you try running ./bin/buildout -vv
> >>
> >> to see what error you are getting in detail?
> >>
> >> On Sun, Jun 3, 2012 at 1:09 PM, Aaron Rothenberg
> >> <a_rothenberg at hotmail.com> wrote:
> >> > Thanks Nathan
> >> >
> >> > I do have the latest python-dev installation
> >> >
> >> > as per your suggestion, I used python-brew to install 2.6 and 2.6.6. I
> >> > used
> >> > both versions to  bootstrap.(then /bin/buildout)
> >> >
> >> > I still get the same error and I still don't  have anything new in bin(
> >> > I
> >> > was expecting at least "test" and "coverage").
> >> >
> >> > I may try and re-install Ubuntu 11.04 and go with that. Might that help?
> >> >
> >> > Thanks again.
> >> >
> >> >
> >> >
> >> >> Date: Sun, 3 Jun 2012 00:42:06 -0500
> >> >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3
> >> >> From: vangheem at gmail.com
> >> >> To: a_rothenberg at hotmail.com
> >> >> CC: plone-setup at lists.plone.org
> >> >
> >> >>
> >> >> Do you have the python development package installed?
> >> >>
> >> >> sudo apt-get install python-dev
> >> >>
> >> >> If you're doing a buildout of plone 4.1, python 2.6 is what is
> >> >> supported for that version.
> >> >>
> >> >>
> >> >> Good luck,
> >> >> Nathan
> >> >>
> >> >> On Sat, Jun 2, 2012 at 10:47 PM, Aaron Rothenberg
> >> >> <a_rothenberg at hotmail.com> wrote:
> >> >> > I'm using  Martin Aspeli's chapter3 bootstrap and buildout
> >> >> > from Professional
> >> >> > Plone 4
> >> >> > Development.
> >> >> >
> >> >> > I'm in Ubuntu 12.04 and I'm using python 2.7.2 (if that matters).
> >> >> > This
> >> >> > machine is dedicated to this project so I 'm free to do
> >> >> >  anything necessary
> >> >> > to resolve this.
> >> >> >
> >> >> > The error is after I run bin/buildout from a  myPloneProject folder.
> >> >> >
> >> >> > the Bin created after the bootstrap  only has 1 buildout item
> >> >> > ("buildout")
> >> >> > in myPloneProject  after the failed bin/buildout.
> >> >> >
> >> >> > here is the output-
> >> >> > Getting distribution for 'zope.interface==3.6.3'.
> >> >> > error: None
> >> >> > An error occured when trying to install zope.interface 3.6.3. Look
> >> >> > above
> >> >> > this message for any errors that were output by easy_install.
> >> >> > While:
> >> >> >   Installing.
> >> >> >   Getting section instance.
> >> >> >   Initializing section instance.
> >> >> >   Installing recipe plone.recipe.zope2instance.
> >> >> >   Getting distribution for 'zope.interface==3.6.3'.
> >> >> > Error: Couldn't install: zope.interface 3.6.3
> >> >> > *************** PICKED VERSIONS ****************
> >> >> > [versions]
> >> >> >
> >> >> > *************** /PICKED VERSIONS ***************
> >> >> >
> >> >> > note: I have 2 decades in  development almost all in .net (some lamp)
> >> >> > but
> >> >> > I'm pretty new to python, eggs, buildouts...
> >> >> >
> >> >> > Thanks.
> >> >> >
> >> >> >
> >> >> >
> >> >> > _______________________________________________
> >> >> > Setup mailing list
> >> >> > Setup at lists.plone.org
> >> >> > https://lists.plone.org/mailman/listinfo/plone-setup
> >> >> >
> >> >
> >> > _______________________________________________
> >> > Setup mailing list
> >> > Setup at lists.plone.org
> >> > https://lists.plone.org/mailman/listinfo/plone-setup
> >> >
> >
> > _______________________________________________
> > Setup mailing list
> > Setup at lists.plone.org
> > https://lists.plone.org/mailman/listinfo/plone-setup
> >

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plone.org/pipermail/plone-setup/attachments/20120605/dfdd0c9f/attachment-0001.html>