[Setup] Error: Couldn't install: zope.interface 3.6.3

Nathan Van Gheem vangheem at gmail.com
Tue Jun 5 16:57:22 UTC 2012


Just a note, the easiest way to get setup quickly is to use the
unified installer http://plone.org/products/plone/releases/4.1.5

What you're now running up against is not having the required lxml libraries.

for ubuntu what I *think* you'll need is something like this:

sudo apt-get install libxml2 libxml2-dev libxslt1-dev python-dev

In your eggs section you might also want to include "Pillow"


-Nathan

On Tue, Jun 5, 2012 at 11:50 AM, Aaron Rothenberg
<a_rothenberg at hotmail.com> wrote:
>
> So I tried  ./bin/buildout -vv as per the suggestions.
>
> I re installed Ubuntu 11.10 with all the appropriate additions for Plone and
> python. Also, I am using a different  minimal buildout (below) which had
> previously worked with the Ubuntu system python(2.7.2) . It doesn't work
> anymore with the local 2.6* python.
>
> This is the end of the output
>
> Getting required 'lxml>=2.2.4'
>   required by plone.app.theming 1.0.
> We have no distributions for lxml that satisfies 'lxml>=2.2.4'.
> Getting distribution for 'lxml>=2.2.4'.
> Running easy_install:
> /home/aaron/.pythonbrew/venvs/Python-2.6/plone-python/bin/python "-c" "from
> setuptools.command.easy_install import main;main()" "-mUNxd"
> "/home/aaron/Plone4Book/MinimalBuildout/eggs/tmp2F9qTX"
> "/tmp/tmpBO4LaDget_dist/lxml-2.3.4.tgz"
> path=/home/aaron/Plone4Book/MinimalBuildout/eggs/setuptools-0.6c12dev_r88846-py2.6.egg
>
> Processing lxml-2.3.4.tgz
> Running lxml-2.3.4/setup.py -q bdist_egg --dist-dir
> /tmp/easy_install-JnFTNn/lxml-2.3.4/egg-dist-tmp-biCF11
> Building lxml version 2.3.4.
> Building without Cython.
> ERROR: /bin/sh: xslt-config: not found
>
> ** make sure the development packages of libxml2 and libxslt are installed
> **
>
> Using build configuration of libxslt
> In file included from src/lxml/lxml.etree.c:239:0:
> src/lxml/etree_defs.h:9:31: fatal error: libxml/xmlversion.h: No such file
> or directory
> compilation terminated.
> error: Setup script exited with error: command 'gcc' failed with exit status
> 1
> An error occurred when trying to install lxml 2.3.4. Look above this message
> for any errors that were output by easy_install.
> While:
>   Installing instance.
>   Getting distribution for 'lxml>=2.2.4'.
> Error: Couldn't install: lxml 2.3.4
>
>
>
> here's what I did from the start
> pythonbrew install 2.6
> then
> pythonbrew switch 2.6
> then
> cd MyPloneProject (where I have bootstrap.p and buildout.cfg)
> then
> python bootstrap.py  --distribute
> then
> bin/buildout  -vv
>
> I also  tried python 2.6.6,2.6.7 to run the bootstrap.
>
> I get this early on
> We have no distributions for ZODB3 that satisfies 'ZODB3>=3.9'.
>
> also I get a lot of these
> Note also that the installation directory must be on sys.path at runtime for
> this to work.  (e.g. by being the application's script directory, by being
> on
> PYTHONPATH, or by being added to sys.path by your code.)
>
> Here is the buildout:
> [buildout]
> extends =
> http://dist.plone.org/release/4.1/versions.cfg
> parts = instance
> [instance]
> recipe = plone.recipe.zope2instance
> user = admin:admin
> eggs = Plone
>
>
> Thanks for the help.
>
>> Date: Sun, 3 Jun 2012 16:37:58 -0500
>
>> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3
>> From: vangheem at gmail.com
>> To: a_rothenberg at hotmail.com
>> CC: plone-setup at lists.plone.org
>>
>> What buildout are you running?
>>
>> Can you try running ./bin/buildout -vv
>>
>> to see what error you are getting in detail?
>>
>> On Sun, Jun 3, 2012 at 1:09 PM, Aaron Rothenberg
>> <a_rothenberg at hotmail.com> wrote:
>> > Thanks Nathan
>> >
>> > I do have the latest python-dev installation
>> >
>> > as per your suggestion, I used python-brew to install 2.6 and 2.6.6. I
>> > used
>> > both versions to  bootstrap.(then /bin/buildout)
>> >
>> > I still get the same error and I still don't  have anything new in bin(
>> > I
>> > was expecting at least "test" and "coverage").
>> >
>> > I may try and re-install Ubuntu 11.04 and go with that. Might that help?
>> >
>> > Thanks again.
>> >
>> >
>> >
>> >> Date: Sun, 3 Jun 2012 00:42:06 -0500
>> >> Subject: Re: [Setup] Error: Couldn't install: zope.interface 3.6.3
>> >> From: vangheem at gmail.com
>> >> To: a_rothenberg at hotmail.com
>> >> CC: plone-setup at lists.plone.org
>> >
>> >>
>> >> Do you have the python development package installed?
>> >>
>> >> sudo apt-get install python-dev
>> >>
>> >> If you're doing a buildout of plone 4.1, python 2.6 is what is
>> >> supported for that version.
>> >>
>> >>
>> >> Good luck,
>> >> Nathan
>> >>
>> >> On Sat, Jun 2, 2012 at 10:47 PM, Aaron Rothenberg
>> >> <a_rothenberg at hotmail.com> wrote:
>> >> > I'm using  Martin Aspeli's chapter3 bootstrap and buildout
>> >> > from Professional
>> >> > Plone 4
>> >> > Development.
>> >> >
>> >> > I'm in Ubuntu 12.04 and I'm using python 2.7.2 (if that matters).
>> >> > This
>> >> > machine is dedicated to this project so I 'm free to do
>> >> >  anything necessary
>> >> > to resolve this.
>> >> >
>> >> > The error is after I run bin/buildout from a  myPloneProject folder.
>> >> >
>> >> > the Bin created after the bootstrap  only has 1 buildout item
>> >> > ("buildout")
>> >> > in myPloneProject  after the failed bin/buildout.
>> >> >
>> >> > here is the output-
>> >> > Getting distribution for 'zope.interface==3.6.3'.
>> >> > error: None
>> >> > An error occured when trying to install zope.interface 3.6.3. Look
>> >> > above
>> >> > this message for any errors that were output by easy_install.
>> >> > While:
>> >> >   Installing.
>> >> >   Getting section instance.
>> >> >   Initializing section instance.
>> >> >   Installing recipe plone.recipe.zope2instance.
>> >> >   Getting distribution for 'zope.interface==3.6.3'.
>> >> > Error: Couldn't install: zope.interface 3.6.3
>> >> > *************** PICKED VERSIONS ****************
>> >> > [versions]
>> >> >
>> >> > *************** /PICKED VERSIONS ***************
>> >> >
>> >> > note: I have 2 decades in  development almost all in .net (some lamp)
>> >> > but
>> >> > I'm pretty new to python, eggs, buildouts...
>> >> >
>> >> > Thanks.
>> >> >
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Setup mailing list
>> >> > Setup at lists.plone.org
>> >> > https://lists.plone.org/mailman/listinfo/plone-setup
>> >> >
>> >
>> > _______________________________________________
>> > Setup mailing list
>> > Setup at lists.plone.org
>> > https://lists.plone.org/mailman/listinfo/plone-setup
>> >
>
> _______________________________________________
> Setup mailing list
> Setup at lists.plone.org
> https://lists.plone.org/mailman/listinfo/plone-setup
>


More information about the Setup mailing list