[Setup] Re: Unable to migrate Data.fs from 2.5.2 to 3.2.2

Alex Clark aclark at aclark.net
Wed May 27 23:54:29 UTC 2009


Hmmm,

Your ZEO is not running, fix that and 'plonectl client fg' should work…
To fix ZEO, try 'plonectl zeoserver fg' and look for errors…

HTH,

Alex

On 2009-05-27, DownNotAcross <mmaxwell at blackarrow.tv> wrote:
>
> This keeps getting more and more twisted, and I hope this post actually makes
> it through the convoluted process of getting subscribed to the mailing list
> via the forum...
>
> Anyway, I have an older server running Plone 2.5.2.  I need to migrate the
> data from this server to a new server running 3.2.2.  The OS is CentOS 5.2.
>
> I attempted following the instructions posted here:
> http://plone.org/documentation/how-to/move-site - first off, I had to take
> the contents of "products" out of the way as that was confusing things even
> further.  So, working with just Data.fs, I did the following:
>
> 1) Rename the "out of the box" Data.fs to Data.fs.orig.
> 2) Copy the Data.fs from the old server in its place.
> 3) Confirm permissions and ownerships are the same as for original Data.fs
> 4) plonectl start.
>
> After step 4, I'm unable to connect and get a 502 proxy error.  Tried
> starting in debug mode as:
>
> plonectl stop
> plonectl zeoserver start
> plonectl client1 fg
>
> I noted that zeoserver started, and upon grep'ing for the PID that was
> reported when it started, I see that it's running.  buildout.cfg has it on
> port 8100.  If I do lsof -i:8100, there is NOTHING running on that port. 
> The debug output from client1 is below:
>
>    1.
>       # ./plonectl client1 fg
>    2.
>       client1: /usr/local/Plone/zeocluster/parts/client1/bin/runzope -X
> debug-mode=on
>    3.
>       2009-05-27 14:59:08 INFO ZServer HTTP server started at Wed May 27
> 14:59:08 2009
>    4.
>               Hostname: 0.0.0.0
>    5.
>               Port: 8080
>    6.
>       2009-05-27 14:59:08 INFO Zope Set effective user to "plone"
>    7.
>       2009-05-27 14:59:11 INFO Marshall libxml2-python not available. Unable
> to register libxml2 based marshallers.
>    8.
>       2009-05-27 14:59:15 INFO ZEO.ClientStorage (3062) ClientStorage
> (pid=3062) created RW/normal for storage: '1'
>    9.
>       2009-05-27 14:59:15 INFO ZEO.cache created temporary cache file
> '<fdopen>'
>   10.
>       2009-05-27 14:59:15 WARNING ZEO.zrpc (3062) CW: error connecting to
> ('127.0.0.1', 8100): ECONNREFUSED
>   11.
>       2009-05-27 14:59:20 WARNING ZEO.zrpc (3062) CW: error connecting to
> ('127.0.0.1', 8100): ECONNREFUSED
>   12.
>       2009-05-27 14:59:30 WARNING ZEO.zrpc (3062) CW: error connecting to
> ('127.0.0.1', 8100): ECONNREFUSED
>   13.
>       2009-05-27 14:59:50 WARNING ZEO.zrpc (3062) CW: error connecting to
> ('127.0.0.1', 8100): ECONNREFUSED 
>
>
> ... and so on.
>
> If I move the old Data.fs (the "out of the box" clean install one) back into
> place, it starts fine without any errors.
>
> I'm completely lost and also completely new to this monster known as
> Plone... any help would be greatly appreciated.
>
> Thanks
>


-- 
Alex Clark · http://aclark.net
Buy Practical Plone 3: http://tinyurl.com/practical-plone




More information about the Setup mailing list