[Setup] Re: Setup Digest, Vol 43, Issue 12
Goran Sljivic
sljivic at simet.hr
Fri May 15 12:32:56 UTC 2009
setup-request at lists.plone.org wrote:
> Send Setup mailing list submissions to
> setup at lists.plone.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.plone.org/mailman/listinfo/setup
> or, via email, send a message with subject or body 'help' to
> setup-request at lists.plone.org
>
> You can reach the person managing the list at
> setup-owner at lists.plone.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Setup digest..."
>
>
> Today's Topics:
>
> 1. Build out Debian Etch (Goran Sljivic)
> 2. Re: Build out Debian Etch (Nick Davis)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 15 May 2009 10:40:34 +0200
> From: Goran Sljivic <sljivic at simet.hr>
> Subject: [Setup] Build out Debian Etch
> To: setup at lists.plone.org
> Message-ID: <4A0D2A82.9000204 at simet.hr>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
>
> Hello
>
> I was try install Plone with this build out tutorial
> http://plone.org/documentation/how-to/plone-on-debian-etch
> and have error in this step:
>
> :~/mybuildout$ python2.4 bootstrap.py
> While:
> Initializing.
>
> An internal error occured due to a bug in either zc.buildout or in a
> recipe being used:
> Traceback (most recent call last):
> File
> "/tmp/tmp1MjN4a/zc.buildout-1.2.1-py2.4.egg/zc/buildout/buildout.py",
> lin e 1508, in main
> user_defaults, windows_restart, command)
> File
> "/tmp/tmp1MjN4a/zc.buildout-1.2.1-py2.4.egg/zc/buildout/buildout.py",
> lin e 124, in __init__
> _update(data, _open(os.path.dirname(config_file), config_file, []))
> File
> "/tmp/tmp1MjN4a/zc.buildout-1.2.1-py2.4.egg/zc/buildout/buildout.py",
> lin e 1202, in _open
> result = _update(_open(base, fname, seen), result)
> File
> "/tmp/tmp1MjN4a/zc.buildout-1.2.1-py2.4.egg/zc/buildout/buildout.py",
> lin e 1165, in _open
> fp = urllib2.urlopen(filename)
> File "urllib2.py", line 130, in urlopen
> return _opener.open(url, data)
> File "urllib2.py", line 364, in open
> response = meth(req, response)
> File "urllib2.py", line 471, in http_response
> response = self.parent.error(
> File "urllib2.py", line 402, in error
> return self._call_chain(*args)
> File "urllib2.py", line 337, in _call_chain
> result = func(*args)
> File "urllib2.py", line 480, in http_error_default
> raise HTTPError(req.get_full_url(), code, msg, hdrs, fp)
> HTTPError: HTTP Error 404: Not Found
>
>
> What is matter ?
>
>
> Best Regards
>
>
Goran,
I don't know what the cause of this problem is, but why are you
building this by hand, when you could use the Unified installer? We're
on Debian Etch too, and the unified installer for Plone 3.1 gives an
installation with buildout which works just fine.
It seems to me you're making life difficult for yourself by following
that tutorial, unless you have some very specific reason why you must
install it all by hand.
Regards,
Nick
:-)
Hi Nick:)
Ok ,If your experience with Debian Etch and unified installer is
postive.Why not:)
Some people advice me build out method beacuse is easier for maintenance.
Your information from "first hand" is useful for me.Next week I will
try unified installer for Plone.
Thank you.
Best regards
Goran
--
Goran Sljivic,sistem-inzenjer
Metalurski fakultet u Sisku
web:http://www.simet.hr
Aleja narodnih heroja 3
44103 Sisak, p.p. br.1
Goran Sljivic,system engineer
University of Zagreb
Faculty of Metallurgy
web:http://www.simet.hr
More information about the Setup
mailing list