[Setup] Re: version error during /bin/buildout

Gary Koskenmaki garyk at skilltran.net
Sun Mar 16 07:47:39 UTC 2008


On Sat, 2008-03-15 at 10:59 +0000, Martin Aspeli wrote:
> Michael Hierweck wrote:
> > Gary Koskenmaki wrote:
> >> On Fri, 2008-03-14 at 18:36 +0100, Michael Hierweck wrote:
> >>> Hi,
> >>>
> >>> Michael Hierweck wrote:
> >>>> Hi,
> >>>>
> >>>> Gary Koskenmaki wrote:
> >>>>> On Thu, 2008-03-13 at 08:44 +0000, Martin Aspeli wrote:
> >>>>>> Gary Koskenmaki wrote:
> >>>>>>> Hi all,
> >>>>>>>
> >>>>>>> I was building a plone3 install today when the following error popped up
> >>>>>>> when running /bin/buildout:
> >>>>>>>
> >>>>>>> While:
> >>>>>>>   Installing plone.
> >>>>>>> Error: There is a version conflict.
> >>>>>>> We already have: plone.portlets 1.1.0a1
> >>>>>>> but plone.app.portlets 1.1.0a1 requires 'plone.portlets>=1.1dev'.
> >>>>>>>
> >>> Gary wrote he used Debian tools to look for some files. I'm using Debian
> >>> (Etch), too.
> >>>
> >>> Since no one else whether here nor on IRC knew about this problem I
> >>> considerd there might be a causal relationship between that problem and
> >>> Debian.
> >>>
> >>   
> >> Just out of curiousity, since you ran into the same problem I did, were
> >> you able to find .installed.cfg on your system after the failed
> >> buildout?  It was not generated on my system, but has been generated on
> >> 3 other identical buildouts I did using Etch a few months back.  
> > 
> > It was possible for to create Plone 3.0 buildouts using Etch. I did this
> > about three weeks ago for the last time. Trying to create Plone 3.1
> > buildouts I received the above mentioned error message and the file
> > ".installed.cfg" was _not_ created. After downloading and compiling
> > Python 2.4 and installing Paste Script and ZopeSkel the error did not
> > appear any more. The error is still reproducable. It depends on the
> > python interpreter used (/usr/bin/python2.4 vs.
> > /opt/python/2.4.4/bin/python2.4) thought both are 2.4.4.
> 
> That's worrysome. Can you paste the exact buildout.cfg that caused this 
> problem (even if it were generated, I'd like to see it), and the exact 
> error. Run buildout with the -vvv flag to get more output and paste the 
> whole command run.
> 
> Thanks,
> Martin
> 

Martin,

Here's a link to the output from bin/buildout and a copy of buildout.cfg
from a failed fresh build.

http://paste.plone.org/20164




More information about the Setup mailing list