[Setup] Re: Plone Windows installer 3.1.1 and 3.1.2 issue

Trivedis at Mumbai trivedis.mumbai at gmail.com
Mon Jun 23 08:37:11 UTC 2008


Pls ignore the typo. I thank you all for the tip :)

--Tapan


On 6/23/08, Trivedis at Mumbai <trivedis.mumbai at gmail.com> wrote:
> Hi
>
> Thanks for the top. Will do that and report if that works for me.
>
> However, I tried the following and at least it went and installed
> Zope. It does not bring Zope up fully (i.e. most of the pages in Zope
> Admin i/f can not be viewed now - but its some start !!). So, thats
> another set of issues to resolve :(
>
> I did the following -
>
> In ImplC.py - changed the import statement to make it specific i.e.
> "AccessControl.ImplPython " rather than just importing ImplPython.
> This took the error away .
> The next error give was for DateTime.py .. where i changed the import
> statement to
> "import datetime  # was from datetime import datetime"
>
> This took me thru the installation. - I know that this is not a wise
> thing to do w/o knowing full extent but from all info I could get on
> import statement and what it does, I dont think I messed it up
> completely.
>
> I however, stand to be corrected on this from experts :)
>
> All in all, it was good to spend that 60 mnts trying to debug :)
>
> -- Tapan
>
> On 6/22/08, Dale DeWitt <dewittdale at gmail.com> wrote:
>> And the README.txt file is written with linux forward slashes.
>>
>> On Jun 21, 5:18 pm, "Alexander Limi" <l... at plone.org> wrote:
>>> You could try giving the new experimental (in an installer sense, it's a
>>> stable release of Plone, of course) installer that is buildout-based a
>>> try:
>>>
>>> http://launchpad.net/plone/3.1/3.1.2/+download/Plone-3.1.2-buildout.exe
>>>
>>> See if that works.
>>>
>>> On Fri, 20 Jun 2008 21:53:17 -0700, Trivedis at Mumbai
>>>
>>>
>>>
>>> <trivedis.mum... at gmail.com> wrote:
>>> > Hi
>>>
>>> > I have been trying to install 3.1.1 or 3.1.2 installer on my Windows
>>> > XP
>>> > machine.
>>>
>>> > I have gone thru the mailing list and tried to do all that has been
>>> > suggested but am not going anywhere with the installation !!
>>>
>>> > It keeps on giving me the famous "SetupSite.py" error "No module named
>>> > :
>>> > ImplPython"
>>>
>>> > The last few lines of log are here. If anyone needs the full log file,
>>> > I
>>> > can
>>> > attach.
>>>
>>> >   File "C:\Program Files\Plone
>>> > 3\Zope\lib\python\AccessControl\Implementation.py", line 51, in
>>> > setImplementation
>>> >     from AccessControl import ImplC as impl
>>> >   File "C:\Program Files\Plone
>>> > 3\Zope\lib\python\AccessControl\ImplC.py",
>>> > line 30, in ?
>>> >     from ImplPython import RestrictedDTML, SecurityManager,
>>> > ZopeSecurityPolicy
>>> > ImportError: No module named ImplPython
>>> > 06/21/08 10:19:01: 5564: finished
>>>
>>> > I have tried to install Python 2.4.4 before running the installer as
>>> > well.
>>>
>>> > I have also made sure there is no other Python version installed on my
>>> > machine (however, there a couple of python DLLs on my machine due to
>>> > some
>>> > other products. Not sure is that is an issue - to me it should not be.
>>>
>>> > Any help is appreciated.
>>>
>>> > Thanks
>>>
>>> > --Tapan
>>>
>>> --
>>> Alexander Limi ·http://limi.net
>>>
>>> _______________________________________________
>>> Setup mailing list
>>> Se... at lists.plone.orghttp://lists.plone.org/mailman/listinfo/setup
>>
>> _______________________________________________
>> Setup mailing list
>> Setup at lists.plone.org
>> http://lists.plone.org/mailman/listinfo/setup
>>
>



More information about the Setup mailing list