[Setup] multiple plone sites: need advice on how to set up
Alan Runyan
alan at enfoldsystems.com
Fri Jun 30 18:48:01 UTC 2006
Look at your zope.conf
Alan Runyan
Enfold Systems, Inc.
http://www.enfoldsystems.com/
phone: +1.713.942.2377x111
fax: +1.832.201.8856
> -----Original Message-----
> From: Stuart L. Marshall [mailto:marshall at slac.stanford.edu]
> Sent: Friday, June 30, 2006 1:46 PM
> To: Alan Runyan
> Cc: Daniel Melnechuk; Stuart L. Marshall; Setup at lists.plone.org
> Subject: Re: [Setup] multiple plone sites: need advice on how
> to set up
>
> Thanks very much for the help.
>
> If I search the zope docs, will I find these mount-point facilities?
> I did not see them in the "add a plone site" sequence on my
> older zope installation but I am about to go to zope 2.9 on a
> fresh install.
>
> Stuart
>
> Quoting Alan Runyan (alan at enfoldsystems.com) on Fri, Jun 30,
> 2006 at 01:34:45PM -0500:
> > We run multiple Plones per Zope install.
> >
> > The best approach is to use Zope's mount-point facilities for each
> > Plone.
> > Thus you can control the ram utilizations and apply zodb
> policies per
> > Plone; i.e. mount each Plone site.
> >
> > On Plone.org we mount the portal_catalog since that has a
> distinctly
> > different usage policy (i.e. we have catalog's mount point
> caching 40k
> > objects or so -- we load a lot of the catalog into memory).
> >
> > cheers
> > Alan Runyan
> > Enfold Systems, Inc.
> > http://www.enfoldsystems.com/
> > phone: +1.713.942.2377x111
> > fax: +1.832.201.8856
> >
> >
> >
> > > -----Original Message-----
> > > From: Daniel Melnechuk [mailto:isis at isisdesign.com]
> > > Sent: Friday, June 30, 2006 1:07 PM
> > > To: Alan Runyan
> > > Cc: Stuart L. Marshall; Setup at lists.plone.org
> > > Subject: Re: [Setup] multiple plone sites: need advice on
> how to set
> > > up
> > >
> > > Alan,
> > >
> > > Sorry to be nag, but what you said is not exactly clear.
> The second
> > > line seems to imply each plone should have its own Zope. But your
> > > first line seems to imply that you should put all Plones into one
> > > Zope.
> > >
> > > Could you please expand on your opinion as to one plone
> per zope or
> > > many plones per zope?
> > >
> > > Peace,
> > > Dan
> > >
> > >
> > > On Jun 30, 2006, at 12:32 PM, Alan Runyan wrote:
> > >
> > >
> > > Run multiple plone sites in a zope instance.
> > >
> > > Each plone site should have its own mount point.
> > >
> > > \
> > >
> > >
> > >
> > >
> > > Alan Runyan
> > >
> > > Enfold Systems, Inc.
> > >
> > > http://www.enfoldsystems.com/
> > >
> > > phone: +1.713.942.2377x111
> > >
> > > fax: +1.832.201.8856
> > >
> > >
> > >
> > >
> > >
> > >
>
> Content-Description: Alan Runyan.vcf
>
>
> --
> - Stuart Marshall 650 926 3616 Office
> - KIPAC/SLAC M/S 29 926 4310 Dept Office
> - 2575 Sand Hill Rd. 926 5566 FAX
> - Menlo Park, CA 94025 marshall at slac.stanford.edu E-mail
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Alan Runyan.vcf
Type: text/x-vcard
Size: 223 bytes
Desc: Alan Runyan.vcf
URL: <http://lists.plone.org/pipermail/plone-setup/attachments/20060630/154aea0f/attachment.vcf>
More information about the Setup
mailing list