[Setup] Certain products cause zope to fail.

alan runyan alan at enfoldsystems.com
Wed Jan 25 22:17:51 UTC 2006


Then run zope in console mode 

> -----Original Message-----
> From: J. Michael Adams [mailto:jma at oksofar.com] 
> Sent: Wednesday, January 25, 2006 3:32 PM
> To: 'alan runyan'; setup at lists.plone.org
> Subject: RE: [Setup] Certain products cause zope to fail.
> 
> Thank you for your quick response, but I can't look at the 
> control panel because zope won't come up--which is the problem.
> 
> And, as I mentioned, nothing is recorded in the event log 
> (probably, again, because zope is not up).
> 
> 
> > -----Original Message-----
> > From: alan runyan [mailto:alan at enfoldsystems.com]
> > Sent: Wednesday, January 25, 2006 1:15 PM
> > To: jma at oksofar.com; setup at lists.plone.org
> > Subject: RE: [Setup] Certain products cause zope to fail.
> > 
> > Look at the Zope Management Interface's 
> Control_Panel/Products folder.
> > http://host:8080/Control_Panel/manage
> > Also look at event.log
> > 
> > alan
> > 
> > > -----Original Message-----
> > > From: setup-bounces at lists.plone.org
> > > [mailto:setup-bounces at lists.plone.org] On Behalf Of J. 
> Michael Adams
> > > Sent: Wednesday, January 25, 2006 3:13 PM
> > > To: setup at lists.plone.org
> > > Subject: [Setup] Certain products cause zope to fail.
> > > 
> > > 
> > > 
> > > I installed Zope 2.7.8 and then Plone 2.1.2 on a Unix system. 
> > > At that point, everything seemed OK -- the default Plone
> > site came up
> > > with no problem.
> > > 
> > > But when I started to move products into the product
> > directory, I had
> > > a problem with certain products.
> > > 
> > > Whenever I move a particular product into the Products
> > directory, Zope
> > > will fail. That is, if Zope is running it'll stop. If Zope is not 
> > > running when I put the product in the directory, then Zope
> > won't come
> > > up. I try starting the Zope process with zopectl, but the process 
> > > won't stay up.
> > > 
> > > It only happens with certain products, but not others. So 
> far, it's 
> > > PloneExFile and PortalTransform. I've written to the PloneExFile 
> > > support people, but have not yet heard back.
> > > But I suspect it's something in my configuration, not a product 
> > > problem.
> > > 
> > > I'm beginning to think that it only happens with products 
> that use 
> > > archetypes, but I'm not sure about that. I'm using the Archetypes 
> > > product that came with 2.1.2.
> > > 
> > > I've checked the file permissions in the products, and everything 
> > > seems normal.
> > > 
> > > ----My main difficulty is this:
> > > 
> > > When the problem happens, nothing appears in any log to 
> indicate a 
> > > problem.
> > > The event.log, for example, records nothing when this 
> happens. So I 
> > > don't where to look to analyze this problem.
> > > 
> > > Any ideas?
> > > 
> > > _______________________________________________
> > > Setup mailing list
> > > Setup at lists.plone.org
> > > http://lists.plone.org/mailman/listinfo/setup
> > > 
> > 
> > 
> > 
> 
> 





More information about the Setup mailing list