[Setup] Re: Plone won't return page on XP localhost
J. Michael Adams
jma at oksofar.com
Tue Jan 3 03:18:35 UTC 2006
Hi -
I already tried the latest nightly build. It didn't work at all.
You had suggested doing that in response to another problem I reported -
about 2.1.1 not creating a new site on win XP. (2.1.0 has the same problem).
- Michael
> -----Original Message-----
> From: alan at enfoldsystems.com [mailto:alan at enfoldsystems.com]
> Sent: Monday, January 02, 2006 7:08 PM
> To: jma at oksofar.com
> Cc: setup at lists.plone.org
> Subject: Re: [Setup] Re: Plone won't return page on XP localhost
>
> michael,
>
> could you try 2.1.1 from http://www.enfoldsystems.com/downloads.html ?
> if that does not work would you mind trying Enfold Server?
> you can try it free for 30 days. but we are using the same
> build process for both enfold server and plone.org community
> installer -- so if you give us feedback - i can get it to the
> appropriate people at enfold.
>
> alan
>
> > (Additional info from original poster)
> >
> > I forgot to mention that there was nothing in the logs or
> the XP event
> > viewer that was relevant.
> >
> > -----Original Message-----
> > From: J. Michael Adams [mailto:jma at oksofar.com]
> > Sent: Monday, January 02, 2006 3:07 PM
> > To: setup at lists.plone.org
> > Subject: Plone won't return page on XP localhost
> >
> > I've installed Plone 2.0.5 on my XP system. (I tried 2.1.1,
> but it has
> > some XP bugs in it).
> >
> > At first, I could not connect to the ZMI through the Plone
> controller.
> > Every
> > time I tried, I got a message that said the browser could
> not connect
> > to the server. I tried going directly to
> localhost:8080/manage, with
> > the same result.
> >
> > Then I tried disconnecting from the internet and reconnecting. That
> > seemed to work, but I'm afraid it was just a coincidence,
> because it
> > worked only that one time. After stopping and starting Plone, I had
> > the same problem whether I was connected to the internet or not.
> >
> > But when I DID get the ZMI, I couldn't bring up a Plone page.
> > Localhost/Plone returned only a single HTTP 404 header. I've tried
> > rebooting, recycling Plone, disconnecting from the
> internet-- nothing
> > works.
> >
> > I've also tried using the physical address and port number
> in the URL,
> > like 127.0.0.1:80. Nothing works.
> >
> > Then I tried changing the Plone port number to 8008 and
> restarting Zope.
> > That seemed to work, and I was able to use Plone just fine.
> That is,
> > until the next time I recycled Zope with the Plone
> controller. Then I
> > was back to square one - I couldn't get the ZMI or the
> Plone site no
> > matter what port number I used.
> >
> > I turned off my firewall, and that didn't change anything. I tried
> > recycling Plone several times, and still couldn't get a
> response from
> > the server. I tried starting Plone and then waiting for a
> really long
> > time. Nothing.
> >
> > I have no idea what makes it work once in a while.
> >
> > BTW, I have this same problem with 2.1.1.
> >
> > Has anyone seen this behavior before? Do you have any idea what's
> > going on?
> >
> > Thanks.
> >
> > _______________________________________________
> > Setup mailing list
> > Setup at lists.plone.org
> > http://lists.plone.org/mailman/listinfo/setup
> >
>
>
>
More information about the Setup
mailing list