[Setup] Certain products cause zope to fail.

J. Michael Adams jma at oksofar.com
Wed Jan 25 22:21:27 UTC 2006


Thank you! 

With debug off, Zope now comes up and I can read the errors in the
event.log.

I wonder why it was on. It must be the default.


> -----Original Message-----
> From: Aaron VanDerlip [mailto:aaron at netcorps.org] 
> Sent: Wednesday, January 25, 2006 1:41 PM
> To: jma at oksofar.com
> Subject: Re: [Setup] Certain products cause zope to fail.
> 
> Are you running in debug mode?
> 
> 
> J. Michael Adams wrote:
> 
> >Thank you for your quick response, but I can't look at the control 
> >panel because zope won't come up--which is the problem.
> >
> >And, as I mentioned, nothing is recorded in the event log (probably, 
> >again, because zope is not up).
> >
> >
> >  
> >
> >>-----Original Message-----
> >>From: alan runyan [mailto:alan at enfoldsystems.com]
> >>Sent: Wednesday, January 25, 2006 1:15 PM
> >>To: jma at oksofar.com; setup at lists.plone.org
> >>Subject: RE: [Setup] Certain products cause zope to fail.
> >>
> >>Look at the Zope Management Interface's 
> Control_Panel/Products folder.
> >>http://host:8080/Control_Panel/manage
> >>Also look at event.log
> >>
> >>alan
> >>
> >>    
> >>
> >>>-----Original Message-----
> >>>From: setup-bounces at lists.plone.org
> >>>[mailto:setup-bounces at lists.plone.org] On Behalf Of J. 
> Michael Adams
> >>>Sent: Wednesday, January 25, 2006 3:13 PM
> >>>To: setup at lists.plone.org
> >>>Subject: [Setup] Certain products cause zope to fail.
> >>>
> >>>
> >>>
> >>>I installed Zope 2.7.8 and then Plone 2.1.2 on a Unix system. 
> >>>At that point, everything seemed OK -- the default Plone
> >>>      
> >>>
> >>site came up
> >>    
> >>
> >>>with no problem.
> >>>
> >>>But when I started to move products into the product
> >>>      
> >>>
> >>directory, I had
> >>    
> >>
> >>>a problem with certain products.
> >>>
> >>>Whenever I move a particular product into the Products
> >>>      
> >>>
> >>directory, Zope
> >>    
> >>
> >>>will fail. That is, if Zope is running it'll stop. If Zope is not 
> >>>running when I put the product in the directory, then Zope
> >>>      
> >>>
> >>won't come
> >>    
> >>
> >>>up. I try starting the Zope process with zopectl, but the process 
> >>>won't stay up.
> >>>
> >>>It only happens with certain products, but not others. So 
> far, it's 
> >>>PloneExFile and PortalTransform. I've written to the PloneExFile 
> >>>support people, but have not yet heard back.
> >>>But I suspect it's something in my configuration, not a product 
> >>>problem.
> >>>
> >>>I'm beginning to think that it only happens with products that use 
> >>>archetypes, but I'm not sure about that. I'm using the Archetypes 
> >>>product that came with 2.1.2.
> >>>
> >>>I've checked the file permissions in the products, and everything 
> >>>seems normal.
> >>>
> >>>----My main difficulty is this:
> >>>
> >>>When the problem happens, nothing appears in any log to indicate a 
> >>>problem.
> >>>The event.log, for example, records nothing when this 
> happens. So I 
> >>>don't where to look to analyze this problem.
> >>>
> >>>Any ideas?
> >>>
> >>>_______________________________________________
> >>>Setup mailing list
> >>>Setup at lists.plone.org
> >>>http://lists.plone.org/mailman/listinfo/setup
> >>>
> >>>      
> >>>
> >>
> >>    
> >>
> >
> >_______________________________________________
> >Setup mailing list
> >Setup at lists.plone.org
> >http://lists.plone.org/mailman/listinfo/setup
> >  
> >
> 
> 
> --
> Aaron VanDerlip
> Programmer
> 
> NetCorps
> Eugene Oregon
> 541 465 1127 x104
> 
> 
> 
> Reclaim Your Inbox!
> http://www.mozilla.org/products/thunderbird
> 
> 
> 
> 




More information about the Setup mailing list