[Setup] Certain products cause zope to fail.
J. Michael Adams
jma at oksofar.com
Wed Jan 25 21:32:22 UTC 2006
Thank you for your quick response, but I can't look at the control panel
because zope won't come up--which is the problem.
And, as I mentioned, nothing is recorded in the event log (probably, again,
because zope is not up).
> -----Original Message-----
> From: alan runyan [mailto:alan at enfoldsystems.com]
> Sent: Wednesday, January 25, 2006 1:15 PM
> To: jma at oksofar.com; setup at lists.plone.org
> Subject: RE: [Setup] Certain products cause zope to fail.
>
> Look at the Zope Management Interface's Control_Panel/Products folder.
> http://host:8080/Control_Panel/manage
> Also look at event.log
>
> alan
>
> > -----Original Message-----
> > From: setup-bounces at lists.plone.org
> > [mailto:setup-bounces at lists.plone.org] On Behalf Of J. Michael Adams
> > Sent: Wednesday, January 25, 2006 3:13 PM
> > To: setup at lists.plone.org
> > Subject: [Setup] Certain products cause zope to fail.
> >
> >
> >
> > I installed Zope 2.7.8 and then Plone 2.1.2 on a Unix system.
> > At that point, everything seemed OK -- the default Plone
> site came up
> > with no problem.
> >
> > But when I started to move products into the product
> directory, I had
> > a problem with certain products.
> >
> > Whenever I move a particular product into the Products
> directory, Zope
> > will fail. That is, if Zope is running it'll stop. If Zope is not
> > running when I put the product in the directory, then Zope
> won't come
> > up. I try starting the Zope process with zopectl, but the process
> > won't stay up.
> >
> > It only happens with certain products, but not others. So far, it's
> > PloneExFile and PortalTransform. I've written to the PloneExFile
> > support people, but have not yet heard back.
> > But I suspect it's something in my configuration, not a product
> > problem.
> >
> > I'm beginning to think that it only happens with products that use
> > archetypes, but I'm not sure about that. I'm using the Archetypes
> > product that came with 2.1.2.
> >
> > I've checked the file permissions in the products, and everything
> > seems normal.
> >
> > ----My main difficulty is this:
> >
> > When the problem happens, nothing appears in any log to indicate a
> > problem.
> > The event.log, for example, records nothing when this happens. So I
> > don't where to look to analyze this problem.
> >
> > Any ideas?
> >
> > _______________________________________________
> > Setup mailing list
> > Setup at lists.plone.org
> > http://lists.plone.org/mailman/listinfo/setup
> >
>
>
>
More information about the Setup
mailing list