[Plone-IT] Disinstallazione plone

Luca Gentili luka.gentili a gmail.com
Gio 12 Apr 2012 15:08:43 UTC


Allora...in realtà la prima installazione pare funzionare, ma quando
rieseguo il buildout con il file cfg che vi copio&incollo di seguito non mi
riparte più l'istanza....proprio non mi crea il file instance pid... il
controller mi dice tutto ok "Instance is running" ma di fatto non è così...
ho provato a disintallare e reinstallare diverse volte (parlo della 4.0.7
perché devo importare un file zexp fatto con quella versione) anche in
percorsi diversi del file system...ma niente da fare ... da cosa dipende?
----------------------------------
INIZIO FILE ALLEGATO
----------------------------------
############################################
#
# Buildout Configuration File for Standalone Plone
# ------------------------------------------------
# $LastChangedDate: 2009-12-23 23:34:27 -0200 (qua, 23 dez 2009) $
$LastChangedRevision: 32613 $
#
# After making changes in this configuration file,
# you should run bin/buildout to update the components.
#
# ALWAYS back up all Plone/Zope data and components
# before changing configuration.
#
# Running "bin/buildout" will update your installation,
# installing missing components as necessary.
#
# Use "bin/buildout -n" to update many components here to the newest
# available releases.
# This will update the add-on products you've added in the eggs= lines.
# This will not, however, upgrade Plone itself (or anything else you've
# pinned with a version specification). To upgrade Plone itself, see the
# comments in "Plone Component Versions".
#
# Tutorial instructions for using zc.buildout for
# configuration management are available at:
# http://plone.org/documentation/tutorial/buildout
# Full details at http://pypi.python.org/pypi/zc.buildout
#
############################################

[buildout]
############################################
# Plone Component Versions
# ------------------------
# This version of the UnifiedInstaller has the components
# of Plone 4 preloaded so that it can install without
# an Internet connection.
# If you want to update, uncomment the "extends = http://..." below,
# edit it to point to the current version URL,
# comment out the "extends = versions.cfg" line
# and run "bin/buildout -n" while attached to the Internet.
# Generally, you only want to do that as part
# of a planned migration.
#
extends-cache = buildout-cache/extends
extends =
    base.cfg
    versions.cfg
#    http://dist.plone.org/release/4.0a3/versions.cfg

############################################
# Ports
# -----
# Specify the port on which your Zope installation
# will listen:
http-address = 8080

############################################
# Eggs
# ----
# Add an indented line to the eggs section for any Python
# eggs or packages you wish to include.
#
eggs =
    Plone
    Plomino
    plomino.tinymce
    quintagroup.portlet.cumulus
    Products.ATGoogleMaps
#    Products.PloneSurvey
#    Products.Ploneboard
#    Products.PloneGlossary
#    collective.portletpage
#    collective.vaporisation
#    collective.taghelper

# Alpha note: many of the products below are not yet
# adapted to Plone 4.
#
# Optional Functionality
# ----------------------
# Uncomment the indented lines to include these products.
# Documentation on all of them, along with many more products,
# is available at
# http://plone.org/products/
#
# Commonly used products:
# * LinguaPlone provides tools for building multi-lingual sites
# * Products.CacheSetup adds the "CacheFu" Plone speedup kit
# * PloneHelpCenter is a simple knowledge base
# * PloneFormGen provides through-the-web form building
#
#    Products.LinguaPlone
#    Products.CacheSetup
#    Products.PloneHelpCenter
#    Products.PloneFormGen
#
# Commonly used development tools:
# * Clouseau uses AJAX to provide a Python prompt inside Plone
# * DocFinderTab puts an object documentation inspector in the Zope
Management Interface
# * Gloworm is a Firebug-like viewlet inspector and customizer
# * plone.reload allows you to refresh Python code and ZCML configuration
#   without restarting Zope. Note that to use plone.reload, you'll also
#   need to uncomment the "zcml" entry for it below.
#
#    Products.Clouseau
#    Products.DocFinderTab
#    Products.Gloworm
#    plone.reload

############################################
# ZCML Slugs
# ----------
# Some eggs need ZCML slugs to tell Zope to
# use them. This is increasingly rare.
zcml =
#    plone.reload
     quintagroup.portlet.cumulus



############################################
# Development Eggs
# ----------------
# You can use paster to create "development eggs" to
# develop new products/themes. Put these in the src/
# directory.
# You will also need to add the egg names in the
# eggs section above, and may also need to add them
# to the zcml section.
#
# Provide the *paths* to the eggs you are developing here:
develop =

############################################
# Debug Mode
# ----------
# Change debug-mode to "on" to run in development mode.
#
debug-mode = off

############################################
# Backup Directory
# ----------------
# Sets the target directory for the bin/backup and bin/snapshotbackup
# commands. Default is inside this project's var directory, but ideally
# this should be on a separate volume or backup server.
#
backups-dir=${buildout:directory}/var

############################################
# Initial User
# ------------
# This is the user id and password that will be used to create the initial
# user id that will allow you to log in and create a Plone site. This only
# sets the initial password; it will not allow you to change an already
# existing password. If you change the admin password via the web interface,
# the one below will no longer be valid.
# If you find yourself locked out of your Zope/Python installation, you may
# add an emergency user via "bin/plonectl adduser".
user=admin:admin

############################################
# Parts Specification
#--------------------
# Specifies the components that should be included in the buildout.
# All the basics are in the base.cfg extension; you may add your
# own if you need them at the end of this file.
parts =
    productdistros
    instance
    zopepy
    zopeskel
    backup
    unifiedinstaller
    controller
[instance]
# Use this section to install and configure a Zope operating
# instance.
# For options see http://pypi.python.org/pypi/plone.recipe.zope2instance
recipe = plone.recipe.zope2instance
# The line below sets only the initial password. It will not change an
# existing password.
user = admin:admin
environment-vars =

[versions]
Cheetah = 2.2.1
Paste = 1.7.2
PasteDeploy = 1.3.3
PasteScript = 1.7.3
ZopeSkel = 2.15
collective.buildout.cluster = 0.6
collective.recipe.backup = 1.3
iniparse = 0.3.1
plone.controller = 1.8
plone.recipe.command = 1.0
plone.recipe.distros = 1.5
plone.recipe.unifiedinstaller = 0.9 #4.0a1
distribute = 0.6.15
Plomino = 1.11
Products.Ploneboard = 2.2
----------------------------------
FINE FILE ALLEGATO
----------------------------------


GRAZIE PER L'AIUTO!!!! :-)

luca



Il giorno 12 aprile 2012 11:28, Luca Gentili <luka.gentili a gmail.com> ha
scritto:

> Ok Yuri,
> ha funzionato...comunque ho notato che nella disinstallazione della 4.1.4
> erano rimaste delle chiavi di registro "sporche" che a scanzo equivoci ho
> rimosso :)
>
> grazie mille
>
> Il giorno 11 aprile 2012 17:32, Yuri <yurj a alfa.it> ha scritto:
>
> Il 11/04/2012 15:57, lucagent ha scritto:
>>
>> Ciao a tutti ho appena provato a disinstallare la versione 4.1.4 da win
>>> xp e
>>> vorrei tornare alla 4.0.7 ma adesso che provo ad installarla mi dice che
>>> python già risulta installato in una directory dove non è presente... e
>>> non
>>> mi parte il plone controller (o meglio parte ma si pianta quando cerca di
>>> determinare lo stato del servizio) tra le altre cose l'unisatller mi ha
>>> rimosso solo metà dell'installazione di plone 4.1.4 ...
>>>
>>> qualcuno ha qualche idea??
>>>
>>>
>>
>> 1) vai nei servizi di windows (gestione computer -> servizi o un qualcosa
>> del genere) e stoppa gli zope che trovi
>> 2) rimuovi la cartellina con plone 4.1.4
>> 3) in 1), avvia gli zope che servono
>>
>> ______________________________**_________________
>> Plone-IT mailing list
>> Plone-IT a lists.plone.org
>> https://lists.plone.org/**mailman/listinfo/plone-plone-**it<https://lists.plone.org/mailman/listinfo/plone-plone-it>
>> http://plone-regional-forums.**221720.n2.nabble.com/Plone-**
>> Italy-f221721.html<http://plone-regional-forums.221720.n2.nabble.com/Plone-Italy-f221721.html>
>>
>
>
>
> --
> Luca
>
>
>


-- 
Luca
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://lists.plone.org/pipermail/plone-plone-it/attachments/20120412/6ca8d684/attachment-0001.html>


Maggiori informazioni sulla lista Plone-IT